| Detail Summary | |
| Part Number | TP-241 |
| Alternative Part Number | 24KU52 |
| Description | VR4205M-1357 LP Gas (10.0") Valve Train Assembly |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Replaces TP-209P. Valve with fittings and bracket. Future VR4205M-1357 set at 10.0". |
| Used On | Single stage tube heaters (DX, DX2, DES, XTS, CX, LS) |
| Voltage | 120V |
| Gas Type | LP at 11.0" |
| Detail Summary | |
| Part Number | PV SUB KIT 120V |
| Alternative Part Number | 4739843, V444A-1028, V444A1028, V444A-11, 24KT78 |
| Description | 120V Combination Gas Valve With Fittings |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | For converting old pilot heaters. Consists of VR4205M-1308 valve, pilot tube & 2 compression fittings. |
| Used On | Substitute on NSP-4, NE-2 |
| Voltage | 120V |
| Gas Type | Natural |
| Detail Summary | |
| Part Number | TP-840A |
| Description | 24V Two Stage Natural Gas Valve Assembly |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 3.5" Manifold - Full gas train assembly (including pipe nipples) |
| Used On | HL2, LD, AG2, RVA2 & DET |
| Voltage | 24V |
| Gas Type | Natural |
| Detail Summary | |
| Part Number | QT-60-C-40 |
| Description | 60", 240V, 4000W Replacement Quartz Lamp Element |
| Shipping Method | UPS |
| Technical Specifications | |
| Used On | BAH-60-C-40 |
| Detail Summary | |
| Part Number | TP-260G |
| Alternative Part Number | IS22062052F5175 |
| Description | Normally Closed Exhaust Pressure Switch (175-200 MBH) |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Direct substitute for exhaust pressure switch PPS10070-2554 (TP-60G). |
| Used On | Older HL, HL-2, DX, DX-2, XTS Series |
| Detail Summary | |
| Part Number | TP-36PKIT |
| Description | Replaces the TP-36 (WR 25K) Valve. Kit consists of TP-107P Propane Gas Valve, TP-78D Circuit Board, TP-78B Wire Harness, TP-390 Adapter |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | NOTE: The external regulator TP-33P must be removed when utilizing this kit. The external sensor will no longer be utilized for flame sensing. Disconnect the electrical wires, but do NOT remove the sensor from the tube. THIS KIT IS NOT FOR GAS CONVERSION! |
| Used On | DTH, DTHS |
| Voltage | 120V |
| Gas Type | Propane |
| Detail Summary | |
| Part Number | TP-264C |
| Description | Differential Pressure Switch With Hose And Barb - IS22043051F5172 |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Substitute for N.O. burner pressure switch PPS10069-2552 (TP-61C). |
| Used On | Old DX, DX2, HL, HL2 |
| Detail Summary | |
| Part Number | P-112B |
| Alternative Part Number | 24KT84 |
| Description | Brass Button Gas Valve |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 1/8" MPT x 1/8" FPT Portable Heaters Manufactured After 10-1-03 Mates with P-113A Elbow Mates with Thermocouple (P-114B) |
| Used On | Portable Heaters |
| Detail Summary | |
| Part Number | DB-264B |
| Description | Normally Open Burner Pressure Switch with Hose, 90° Mounting Bracket and Tie (DBS Series models only) |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Direct replacement for DB-61B (FS4450-1430) N.O. Pressure Switch. |
| Used On | DBS |
