TP-3250 Circuit Board Modulating Controller
| Detail Summary | |
| Part Number | TP-3250 |
| Description | Circuit Board - Modulating Controller |
| Shipping Method | UPS |
| Technical Specifications | |
| Used On | MP |
| Detail Summary | |
| Part Number | TP-3380 |
| Description | 4" Dia x 16" Burner Tube with Flange. Hot Surface Ignition Plate (TP-383), Gasket (TP-321) & Sight Glass Kit (TP-17) are included. |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Hot surface ignition = TP-3380, Direct spark ignition = TP-3580 |
| Used On | HL3, DX3, XTS3 |
| Detail Summary | |
| Part Number | TP-33P |
| Alternative Part Number | 1595560 |
| Description | RV47L-11" LP Gas Regulator |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Replaces R400, 1/2 lb. max. pressure(reg. will lock up under higher pressure) |
| Used On | DTH, DTHS |
| Gas Type | LP |
| Detail Summary | |
| Part Number | TP-351A |
| Alternative Part Number | Mark17DU-117, 1FYA7 , 6034083 |
| Description | Mark17DU-117 Potted HSI Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | With Flame Rod (Remote sense). TP-390 adapter required if replacing older circuit boards. |
| Used On | DX (remote sense), DX-2, XTS, LS |
| Voltage | 120 |
| Detail Summary | |
| Part Number | TP-3580 |
| Description | 4" Dia x 16" Burner Tube with Flange. Hot Surface Ignition Plate (TP-3083), Gasket (TP-321) & Sight Glass Kit (TP-17) are included. |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Hot surface ignition = TP-3380, Direct spark ignition = TP-3580 |
| Used On | DET3, DES3 |
| Detail Summary | |
| Part Number | TP-36NKIT |
| Description | Replaces the TP-36 (WR 25K) Valve. Kit consists of TP-107 Natural Gas Valve, TP-78D Circuit Board, TP-78B Wire Harness, TP-390 Adapter |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | NOTE: The external regulator TP-33 must be removed when utilizing this kit. The external sensor will no longer be utilized for flame sensing. Disconnect the electrical wires, but do NOT remove the sensor from the tube. THIS KIT IS NOT FOR GAS CONVERSION! |
| Used On | DTH, DTHS |
| Voltage | 120V |
| Gas Type | Natural |
| Detail Summary | |
| Part Number | TP-36PKIT |
| Description | Replaces the TP-36 (WR 25K) Valve. Kit consists of TP-107P Propane Gas Valve, TP-78D Circuit Board, TP-78B Wire Harness, TP-390 Adapter |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | NOTE: The external regulator TP-33P must be removed when utilizing this kit. The external sensor will no longer be utilized for flame sensing. Disconnect the electrical wires, but do NOT remove the sensor from the tube. THIS KIT IS NOT FOR GAS CONVERSION! |
| Used On | DTH, DTHS |
| Voltage | 120V |
| Gas Type | Propane |
| Detail Summary | |
| Part Number | TP-380 |
| Alternative Part Number | 24KU64 |
| Description | 4" Dia x 16" Burner Tube with Flange. Hot Surface Ignition Plate (TP-383), Gasket (TP-321) & Sight Glass Kit (TP-17) are included. |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Hot surface ignition = TP-380, Direct spark ignition = TP-580, Mini ignitor = TP-1280, Stainless steel hot surface ignition = TP-980 |
| Used On | HL2, DX2, XTS, AG2, RVA2 |