| Detail Summary | |
| Part Number | DR-LROD |
| Alternative Part Number | 1009307, GA10-43 , 24KR71 |
| Description | Long Stainless Steel Rod For Rayhead |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 17-3/8" long, 8 per rayhead required. This part replaces GA10-43. |
| Used On | All DR Heaters |
| Detail Summary | |
| Part Number | 32-508 |
| Alternative Part Number | 2430122 , 1FEK9, G32-508 |
| Description | Main Burner Spark Electrode 33Prong |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 3-Prong Electrode. This part replaces G32-508. |
| Used On | NFS-2, PFS-2 |
| Detail Summary | |
| Part Number | MARK 10DX-117 |
| Alternative Part Number | 3314762, 1FEK3, GMARK-10, MARK10X-117 |
| Description | Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Potted circuit board. DRWH-120 required if replacing MARK10X-117. This part replaces GMARK-10 & MARK10X-117. |
| Used On | NFS-2, PFS-2, Dayton [120V] |
| Voltage | 120V |
| Detail Summary | |
| Part Number | TP-55A |
| Alternative Part Number | 3326758, 1FYA9 |
| Description | Blower Assembly |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Same motor as TP55, higher efficiency, different wheel (Fergas type wheel). The TP-55 cannot substitute the TP-55A fan blower. |
| Used On | DTH(S)-2 40-100, DTH(S)-2 40-100, DTH(S)-2 40-100, DTH/S-2 125,150, DTH(S)-3 125, DTH(S)-3 150, HL, HL-2, HL2, HL3, DX, DX2, DX3, XTS, XTS3, DET, DET3, DES, DES3, LD, LS-40, LS-50, CL, CX, RVA, RVA2, AG1, AG2, RH |
| Voltage | 120V |
| Detail Summary | |
| Part Number | TP-264B |
| Alternative Part Number | IS22010051F5166 |
| Description | Normally Open Differential Pressure Switch With Hose And Barb (50-100 MBH) |
| Technical Specifications | |
| Notes | Direct Substitute for Burner Pressure Switch PPS10069-2550 (TP-61B) |
| Used On | HL2, DX2, XTS, DET, DES, RH, AG1, AG2, RVA2, SV, HLV |
| Detail Summary | |
| Part Number | TP-351A |
| Alternative Part Number | Mark17DU-117, 1FYA7 , 6034083 |
| Description | Mark17DU-117 Potted HSI Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | With Flame Rod (Remote sense). TP-390 adapter required if replacing older circuit boards. |
| Used On | DX (remote sense), DX-2, XTS, LS |
| Voltage | 120 |
| Detail Summary | |
| Part Number | VR4205M-1308 |
| Alternative Part Number | 1774751,V444A-1028, V4441028, V444A-1127 |
| Description | VR4205M-1308 Natural Gas (6.0") Valve And Union |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | This part replaces V444A-1028, G1101, G36C01A & V444A-1127. |
| Used On | High Intensity Only: NFS-2 [120V], American 450N |
| Voltage | 120V |
| Gas Type | Natural Gas |
| Detail Summary | |
| Part Number | TP-65I |
| Alternative Part Number | 6036767, 24KT45 |
| Description | 33" X 4" Standard Interlocking Baffle |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Replaces TP-65 (A-D) |
| Used On | All except LS, LD |
| Voltage | N / A |
| Gas Type | N / A |
| Detail Summary | |
| Part Number | TP-78D |
| Alternative Part Number | Mark 17DX-117, 6188148 |
| Description | Mark 17DX-117 Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Non Flame Rod Heaters. TP-390 adapter is required if replacing old TP-78A (2020-61) circuit board. |
| Used On | DTH(S)-3, DRV, DBS, DX(w/direct sense) |
| Voltage | 120 |
| Detail Summary | |
| Part Number | TP-55 |
| Alternative Part Number | 1595008 |
| Description | Old Style Fan Blower |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Replacement TP-55 will have 7021-6745 motor and housing however, the old style TP-55 wheel is used (strip type wheel). The TP-55A cannot substitute the TP-55 fan blower. |
| Used On | DTH, DTHS |
| Voltage | 120V |
| Detail Summary | |
| Part Number | TP-240 |
| Alternative Part Number | 24KU51 |
| Description | VR4205-M-1324 Natural Gas (3.5") Valve Train Assembly |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Replaces TP-209. Valve with fittings and bracket. |
| Used On | Single stage tube heaters (DX, DX2, DES, XTS, CX, LS) |
| Voltage | 120V |
| Gas Type | Natural at 3.5" |
| Detail Summary | |
| Part Number | TP-264E |
| Alternative Part Number | IS22016051F5169 |
| Description | Normally Open Differential Pressure Switch With Hose And Barb. |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Direct substitute for pressure switch PPS10069-3050 (TP-61E) |
| Used On | MP, HL3, HL2, DX3, DX2, XTS3, XTS, DET3, DET, DES3, DES, RH, AG1, AG2, RVA2, CL, CX, SV, HLV |
| Detail Summary | |
| Part Number | MARK 10DX-24 |
| Alternative Part Number | 1FEK6,6366573 |
| Description | 24V Potted Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 24V potted circuit board. Requires DRWH-24 wiring harness if replacing Mark 10X-24 board. |
| Used On | DR Models |
| Voltage | 24V |
| Detail Summary | |
| Part Number | HVW-18 |
| Alternative Part Number | 1302918, G HVW-18 , 24KR77 |
| Description | High Voltage Ignition Wire |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | 18" orange spark wire with boot. This part replaces G HVW-18. |
| Used On | NFS-2, PFS-2 |
| Detail Summary | |
| Part Number | DRWH-120 |
| Alternative Part Number | 4766457, 1FEK4 |
| Description | 120V Wire Harness For MARK 10DX-117 Circuit Board |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Mates to MARK 10DX-117 Circuit Board |
| Used On | NFS-2, PFS-2 |
| Voltage | 120V |
| Detail Summary | |
| Part Number | TP-264D |
| Alternative Part Number | IS22020051F5170 |
| Description | Normally Open Differential Pressure Switch With Hose And Barb |
| Technical Specifications | |
| Notes | Direct Substitution for Pressure Switch PPS10069-2551 (TP-61D) |
| Used On | (175 MBH) HL2, DX2, XTS, DET, DES, LS, RH, AG1, AG2, RVA2, SV, HLV (65-75 MBH) HL3, DX3, DET3, DES3, XTS3 |
| Detail Summary | |
| Part Number | VS820A-1070 |
| Alternative Part Number | 4375101, 24KT36 |
| Description | Combination Gas Valve Natural Gas 100% |
| Shipping Method | UPS |
| Technical Specifications | |
| Used On | NMV-2, American 8N, 18N |
| Voltage | MV |
| Gas Type | Natural Gas |
| Detail Summary | |
| Part Number | TP-26B |
| Alternative Part Number | 4095899, 24KT27 |
| Description | 10' x 4" Titanium Combustion Tube |
| Shipping Method | LTL to Commercial Address. Contact us for residential shipping price. |
| Technical Specifications | |
| Notes | Black coated. Part number and swaged date are stamped approx. 18 inches from the male end of the tube, next to the seam. |
| Used On | DTH(S) 100 MBH and above |
| Detail Summary | |
| Part Number | P-114B |
| Alternative Part Number | 24KT85 |
| Description | Thermocouple with Nuts for Brass Gas Valve |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | Includes Two Brass Mounting Nuts. P-115 Clip Needed. |
| Used On | Portable Heaters |
| Detail Summary | |
| Part Number | TP-36NKIT |
| Description | Replaces the TP-36 (WR 25K) Valve. Kit consists of TP-107 Natural Gas Valve, TP-78D Circuit Board, TP-78B Wire Harness, TP-390 Adapter |
| Shipping Method | UPS |
| Technical Specifications | |
| Notes | NOTE: The external regulator TP-33 must be removed when utilizing this kit. The external sensor will no longer be utilized for flame sensing. Disconnect the electrical wires, but do NOT remove the sensor from the tube. THIS KIT IS NOT FOR GAS CONVERSION! |
| Used On | DTH, DTHS |
| Voltage | 120V |
| Gas Type | Natural |
