HL-3 SERIES TUBE HEATER PARTS

(Manufactured 07/08 to 9/12)

RE-VERBER-RAY

HL3 SERIES TUBE HEATER

(Manufactured 07/08 to 9/12)

Common Components

Part Description Original
Part Number

Replacement
Part Number

Fan TP-55A TP-55A
Air Pressure Switch See Below See Below
Circuit Board TP-851B1 TP-851B1
Wire Harness TP-3252 TP-3252
Relay (note: this factory installed option is not on all units) TP-13252 TP-13252
Ignition Device TP-50 TP-50
50-100 MBH Low Stainless Steel Burner (Natural Gas only) TP-3070 TP-3070
50-100 MBH Low Stainless Steel Burner (LP Gas only) TP-200A TP-200A
125-150 MBH Mid Stainless Steel Burner (Nat & LP Gas) TP-201B TP-201B
175-200 MBH High Stainless Steel Burner (Nat & LP Gas) TP-3071 TP-3071
Natural Gas Valve TP-3140 TP-3140
LP Gas Valve TP-3141 TP-3141
Transformer TP-826 TP-826
24V Yellow Operational  Indicator Light TP-828 TP-828
24V Green Operational Indicator Light TP-1428 TP-1428
Flame Rod TP-222 TP-222
16″ Tube TP-3080A TP-3380
Combustion Chamber3, 50-125 MBH (Coated Aluminized Steel) TP-26A TP-26A
Combustion Chamber3, 150-200 MBH (Titanium Coated Steel) TP-26B TP-26B
Combustion Chamber3, 75-150 MBH (409 Stainless Steel) TP-26E TP-26E
Radiant Tubes (Coated Aluminized Steel) TP-26A TP-26A
Radiant Tubes (304 Stainless Steel) TP-26D TP-26D
10 Ft. Highly Polished Aluminum Reflector Section4 TP-20C TP-20C
Baffle TP-65I TP-65I

1Cross reference number (on unit): 35-66.  Note: This board had an on-board red diagnostic light.
2When the optional HLRP isolation relay option is selected, two relays are installed.
3Refers to the first 10′ section of tubing downstream of burner.
4Models with stainless steel upgrades require TP-20D 10 ft. reflector sections.

Pressure Switches

BTU/H Range (x1000) 65-75 100-125 150-200
Part Number TP-264D TP-1264A TP-264F
X-Ref., IS220- -20051F5170 -25051F5127 -35051F5132
Normal Setting Open Open Open