HL-2 SERIES TUBE HEATER PARTS
(Manufactured 06/03 to 05/05)
RE-VERBER-RAY
HL2 SERIES TUBE HEATER
(Manufactured 06/03 to 05/05)
Common Components |
||
Part Description | Original Part Number |
Replacement |
Fan | TP-55A | TP-55A |
Air Pressure Switch | See Below | See Below |
Circuit Board | TP-8511 | TP-8511 |
Wire Harness | TP-852 | TP-852 |
Relay (note: this factory installed option is not on all units) | TP-825 | TP-825 |
Ignition Device | TP-50 | TP-50 |
50-100 MBH Burner | TP-200A | TP-200A |
125-200 MBH Burner | TP-201 | TP-201B |
Natural Gas Valve | TP-840 | TP-840A |
LP Gas Valve | TP-841 | TP-841A |
Transformer | TP-826 | TP-826 |
Indicator Lights | TP-828 | TP-828 |
Flame Rod | TP-222 | TP-222 |
16″ Tube | TP-202 or TP-980 | TP-380 or TP-980 |
Combustion Chamber2, 50-125 MBH (Aluminized Steel) | TP-26A | TP-26A |
Combustion Chamber2, 150-200 MBH (Titanium Coated Steel) | TP-26B | TP-26B |
Combustion Chamber2, 75-150 MBH (Stainless Steel) | TP-26E | TP-26E |
Radiant Tubes | TP-26A | TP-26A |
10 Ft. Reflector Section3 | TP-20C | TP-20C |
Baffle | TP-65I | TP-65I |
1Cross reference number (on unit): Micro 60-24.
2Refers to the first 10′ section of tubing downstream of burner.
3HL2-SS models require TP-20D 10 ft. reflector sections.
Pressure Switches |
||||
BTU/H Range (x1000) | 50-100 | 125-150 | 175 | 200 |
Part Number | TP-264B | TP-264E | TP-264D | TP-264F |
X-Ref., IS220- | -10051F5166 | -16051F5169 | -20051F5170 | -35051F5132 |
Normal Setting | Open | Open | Open | Open |
Pressure Switch Tube Set | TP-AK4 | TP-AK4 | TP-AK4 | TP-AK4 |