DX SERIES TUBE HEATER PARTS
(Manufactured 05/04/95 to 09/95)
RE-VERBER-RAY
DX SERIES TUBE HEATER
(Manufactured 05/04/95 to 09/95)
Common Components |
||
Part Description |
Original |
Replacement |
Fan | TP-55A | TP-55A |
Burner – Normally Open Air Switch | See Below | See Below |
Exhaust – Normally Closed Air Switch | See Below | See Below |
Circuit Board** | TP-78A | TP-78D1,2 and TP-390 |
Wire Harness | TP-78B | TP-78B |
Ignition Device | TP-50 | TP-50 |
50-100 MBH Burner | TP-200 | TP-200A |
125-200 MBH Burner | TP-201 | TP-201B |
Natural Gas Valve | TP-209 | TP-240 |
LP Gas Valve | TP-209P | TP-241 |
Flame Rod (see TP-FRK for full flame rod kit) | TP-222 | TP-222 |
16″ Tube | TP-202 | TP-380 |
Combustion Chamber3, 50-125 MBH (Aluminized Steel) | TP-26A | TP-26A |
Combustion Chamber3, 150-200 MBH (Titanium Coated Steel) | TP-26B | TP-26B |
Combustion Chamber3, 75-150 MBH (Stainless Steel) | TP-26E | TP-26E |
Radiant Tubes | TP-26A | TP-26A |
10 Ft. Reflector Section | TP-20C | TP-20C |
Baffle | TP-65I | TP-65I |
**Cross reference number on unit: Mark 17X-117.
1Use TP-390 adaptor to attach replacement board to original harness.
2If flame sense problems exist, contact us for remote sense wiring.
3Refers to the first 10′ section of tubing downstream of burner.
Pressure Switches |
|||||
BTU/H Range (x1000) | 50-100 | 125-150 | 175 | 200 | |
Switch 14 | Part Number | TP-264B | TP-61D | TP-61D | TP-61C |
X-Ref., PPS10069- | IS2 | -2551 | -2551 | -2552 | |
Normal Setting | Open | Open | Open | Open | |
P. S. Tube Set | TP-AK3 | TP-AK3 | TP-AK3 | TP-AK3 | |
Switch 24 | Part Number | TP-260F | TP-260F | TP-60G | TP-60G |
X-Ref., PPS10070- | IS2 | IS2 | -2554 | -2554 | |
Normal Setting | Closed | Closed | Closed | Closed | |
P. S. Tube Set | TP-AK4 | TP-AK4 | TP-AK4 | TP-AK4 | |
4Pressure switch #1 is electrically first in series, and pressure switch #2 is second in series.