DX SERIES TUBE HEATER PARTS
(Manufactured 01/93 to 05/04/95)
RE-VERBER-RAY
DX SERIES TUBE HEATER
(Manufactured 01/93 to 05/04/95)
Common Components |
||
| Part Description |
Original |
Replacement |
| Fan | TP-55A | TP-55A |
| Burner – Normally Open Air Switch | See Below | See Below |
| Exhaust – Normally Closed Air Switch | See Below | See Below |
| Circuit Board** | TP-78A | TP-78D1,2 and TP-390 |
| Wire Harness | TP-78B | TP-78B |
| Ignition Device | TP-50 | TP-50 |
| 50-100 MBH Burner | TP-200 | TP-200A |
| 125-200 MBH Burner | TP-201 | TP-201B |
| Natural Gas Valve | TP-209 | TP-240 |
| LP Gas Valve | TP-209P | TP-241 |
| Flame Rod | N/A | Optional TP-FRK2 |
| 16″ Tube | TP-202 | TP-380 |
| Combustion Chamber3, 50-125 MBH (Aluminized Steel) | TP-26A | TP-26A |
| Combustion Chamber3, 150-200 MBH (Titanium Coated Steel) | TP-26B | TP-26B |
| Combustion Chamber3, 75-150 MBH (Stainless Steel) | TP-26E | TP-26E |
| Radiant Tubes | TP-26A | TP-26A |
| 10 Ft. Reflector Section | TP-20C | TP-20C |
| Baffle | TP-65I | TP-65I |
**Cross reference number on unit: Mark 17X-117.
1Use TP-390 adaptor to attach replacement board to original harness.
2Add TP-FRK if flame sense problems exist. Contact us.
3Refers to the first 10′ section of tubing downstream of burner.
Pressure Switches |
|||||
| BTU/H Range (x1000) | 50-100 | 125-150 | 175 | 200 | |
| Switch 14 | Part Number | TP-264B | TP-264D | TP-264D | TP-264C |
| X-Ref., PPS10069- | IS2 | -3050 | -2551 | -2552 | |
| Normal Setting | Open | Open | Open | Open | |
| P. S. Tube Set | TP-AK3 | TP-AK3 | TP-AK3 | TP-AK3 | |
| Switch 24 | Part Number | TP-260F | TP-260F | TP-260G | TP-260G |
| X-Ref., PPS10070- | IS2 | IS2 | -2554 | -2554 | |
| Normal Setting | Closed | Closed | Closed | Closed | |
| P. S. Tube Set | TP-AK4 | TP-AK4 | TP-AK4 | TP-AK4 | |
4Pressure switch #1 is electrically first in series, and pressure switch #2 is second in series.
