DX-3 SERIES TUBE HEATER PARTS
(Manufactured 08/14 to Present)
RE-VERBER-RAY
DX3 SERIES TUBE HEATER
(Manufactured 08/14 to Present)
Common Components |
||
| Part Description | Original Part Number |
Replacement |
| Fan | TP-55A | TP-55A |
| Fan (175,000 BTU and above only) | TP-55A | TP-3215 |
| Air Pressure Switch | See Below | See Below |
| Circuit Board | TP-351A1 | TP-351A1 |
| Wire Harness | TP-352A | TP-352A |
| Terminal Block | TP-329 | TP-329 |
| Ignition Device | TP-50 | TP-50 |
| 50-125 MBH Low Stainless Steel Burner (Natural & LP Gas) | TP-3072 | TP-3072 |
| 150 MBH Mid Stainless Steel Burner (Nat & LP Gas) | TP-201B | TP-201B |
| 175-200 MBH High Stainless Steel Burner (Nat & LP Gas) | TP-3071 | TP-201B |
| Natural Gas Valve | TP-3040 | TP-3040 |
| LP Gas Valve | TP-3041 | TP-3041 |
| 120V Yellow Operational Indicator Light | TP-328 | TP-328 |
| Flame Rod | TP-222 | TP-222 |
| 16″ Tube | TP-3080A | TP-3380 |
| Combustion Chamber2, 50-125 MBH (Coated Aluminized Steel) | TP-26A | TP-26A |
| Combustion Chamber2, 150-200 MBH (Titanium Coated Steel) | TP-26B | TP-26B |
| Combustion Chamber2, 75-150 MBH (409 Stainless Steel) | TP-26E | TP-26E |
| Radiant Tubes (Coated Aluminized Steel) | TP-26A | TP-26A |
| Radiant Tubes (304 Stainless Steel) | TP-26D | TP-26D |
| 10 Ft. Highly Polished Aluminum Reflector Section3 | TP-20C | TP-20C |
| Baffle | TP-65I | TP-65I |
1Cross reference number (on unit): 35-66. Note: This board had an on-board red diagnostic light.
2Refers to the first 10′ section of tubing downstream of burner.
3Models with stainless steel upgrades require TP-20D 10 ft. reflector sections.
Pressure Switches |
||||
| BTU/H Range (x1000) | 50 | 65-75 | 100-125 | 150-200 |
| Part Number | TP-264E | TP-264D | TP-1264A | TP-264F |
| X-Ref., IS220- | -216051F5169 | -20051F5170 | -25051F5127 | -35051F5132 |
| Normal Setting | Open | Open | Open | Open |
